ADJ ELEMENT HEX User Manual

Also see for ELEMENT HEX: User instructions

14DMX Mode:Operating through a DMX controller gives the user the freedom to create their own programs tai-lored to their own individual needs. The Element Hex has 5 DMX modes: 6 channel mode, 7 channelmode, 8 channel mode, 11 channel mode, and 12 channel mode. See the DMX Traits section of thismanual for each modes DMX traits. This function will allow you to control each individual fixture’straits with a standard DMX 512 controller.1. To run your fixture in DMX mode press the MODE button until “d.XXX” is displayed. “XXX” rep-resents the current displayed DMX address. Use the UP or DOWN buttons to select your desiredDMX address, then press the SETUP button to select your DMX Channel mode.2. Use the UP or DOWN buttons to scroll through the DMX Channel modes. The Channel modesare listed below:• To run the 6 Channel Mode, press the MODE button until “Ch06” is displayed.• To run the 7 Channel Mode, press the MODE button until “Ch07” is displayed.• To run the 8 Channel Mode, press the MODE button until “Ch08” is displayed.• To run the 11 Channel Mode, press the MODE button until “Ch011” is displayed.• To run the 12 Channel Mode, press the MODE button until “Ch012” is displayed.3. After you have chosen your desired DMX address and channel mode plug in the fixture via theXLR connections to any standard DMX controller.DMX MODE