ADJ ELEMENT HEX User Manual

Also see for ELEMENT HEX: User instructions

19SYSTEM MENUMENU SUBMENU OPTIONS FUNCTIONSDMX MODEAddress d001~d512 DMX Address SettingChannelsCh06 6 DMX Channel ModeCh07 7 DMX Channel ModeCh08 8 DMX Channel ModeCh11 11 DMX Channel ModeCh12 12 DMX Channel ModeNo DMX modeblAc When the DMX signal is lost or interrupted, the unit will go into BLACKOUT mode.LASt When the DMX signal is lost or interrupted, the unit will hold at the LAST DMX setting.ProG When the DMX signal is lost or interrupted, the unit will run an auto program.Delay mode dr-0~dr-4 Select the unit delay modeSECONDARY Secondary Setting SEcd Designate the unit as a secondary unit in a primary-secondary set up.DIMMER MODERed Dimmer r.000~r.255 Adjust the intensity of the red color.Green Dimmer G.000~6.255 Adjust the intensity of the green color.Blue Dimmer b.000~6.255 Adjust the intensity of the blue color.White Dimmer U.000~U.255 Adjust the intensity of the white color.Amber Dimmer A.000~A.255 Adjust the intensity of the amber color.UV Dimmer u.000~u.255 Adjust the intensity of the UV color.Flash Adjustment f5.00~5o 1G Adjust the flash speed. “00” is Off, “01” is the slowest speed, and “15” is the fastest.SOUND MODE Sound Active so01~so1G Select 1 of 16 sound active programs.Sensitivity Adjust sj-0~sj-8 Adjust the sound sensitivity. “0” is the lowest level, and “8” is the highest level.AUTO RUN MODEColor Fade Mode AF01~AF16 Select 1 of 16 color fade modes.Color Change Mode AJ01~AJ16 Select 1 of 16 color change modes.Color Change &Color Fade Mode A-JF This mode will run both color change and color fade continuously.Speed Adjustment SP.01~SP.16 Adjust the running speed of the current mode.STATIC COLORMODEColor Select CL00~CLG3 Select 1 of 63 static colors.Flash Adjustment f5.00~f5.15 Adjust the flash speed. “00” is Off, “01” is the slowest speed, and “15” is the fastest.BATTERY LIFEENERGY SAVELOADINGSET UPBattery Life Display 6---/6000~b100Displays the current battery life.“b---” means that the battery is not beingused.“bXXX” means that the battery is in use. “XXX” represents the battery chargepercentage.“b000” means that the battery has no charge.“b100” means that the batteryis at full charge.Energy SavingMode65on Activates energy saving mode.b5oF Deactivates energy saving mode.Load On/Off Select Loon Activates battery power.LooF Deactivates battery power.OTHERDisplay don LED display is always on.dooF LED display turns off after 30 seconds.IR Remote On/Off iron IR remote function is activated.iroF IR remote function is deactivated.DisplayNormal/Invertedstnd LED digital display is normal.-3- LED digital display is inverted.Menu LockloC1 Deactivate display lock. (Display lock is not active)LoC2 Activate display lock. (Press the MODE button for 3 seconds to unlock the display)LoC3 Activate display lock two.(Press UP-DOWN-UP-DOWN to unlock the display)Initialization Mode dEFA Default to factory settings.WIFLY SET UPWiFly Address rC00~rC14 Set the WiFly address.WiFly FunctionOn/OffrCon WiFly function is activerCof WiFly function is not active.