ADJ ENCORE PROFILE PRO COLOR User Instructions

10FLAMMABLE MATERIAL WARNINGKeep fixture minimum 5.0 feet (1.5m) away from flammable materials and/or pyrotechnics.ELECTRICAL CONNECTIONSA qualified electrician should be used for all electrical connections and/or installations.USE CAUTION WHEN POWER LINKING OTHER MODEL FIXTURES AS THE POWERCONSUMPTION OF OTHER MODEL FIXTURES MAY EXCEED THE MAX POWER OUTPUTON THIS FIXTURE. CHECK SILK SCREEN FOR MAX AMPS.MINIMUM DISTANCE TO OBJECTS/SURFACESMUST BE 6.6 FEET (2 METERS)MINIMUM DISTANCE OF INFLAMMABLE MATERIALSFROM THE SURFACE 1.6 FEET (0.5 METER)MAXIMUM TEMPERATURE OF EXTERNAL SURFACE 185° F (85°C)DO NOT INSTALL THE FIXTURE IF YOU ARE NOT QUALIFIED TO DO SO!Fixture MUST be installed following all local, national, and country commercial electrical andconstruction codes and regulations.Before rigging/mounting a single fixture or multiple fixtures to any metal truss/structure or placing thefixture(s) on any surface, a professional equipment installer MUST be consulted to determine if themetal truss/structure or surface is properly certified to safely hold the combined weight of the fixture(s),clamps, cables, and accessories.Fixture ambient operating temperature range is 14° to 113°F. (-10° to 45°C).Do not Use fixture under or above this temperature.Fixture(s) should be installed in areas outside walking paths, seating areas, or away from areas wereunauthorized personnel might reach the fixture by hand.NEVER stand directly below the fixture(s) when rigging, removing or servicing.Overhead fixture installation must always be secured with a secondary safety attachment, such as anappropriately rated safety cable.Allow approximately 60 minutes for the fixture to cool down before servicing.RIGGINGOverhead rigging requires extensive experience, including among others calculating workingload limits, installation material being used, and periodic safety inspection of all installationmaterial and the fixture. If you lack these qualifications, do not attempt the installation yourself.Improper installation can result in bodily injury.ALWAYS ATTACH AN APPROPRIATELY RATED SAFETY CABLE (NOT INCLUDED) THATMEETS ALL LOCAL, NATIONAL, AND COUNTRY CODES AND REGULATIONS WHENEVERINSTALLING FIXTURE IN A SUSPENDED ENVIRONMENT!Encore Profile Pro Color Installation