ADJ Encore Profile Mini WW User Manual

10I N S T A L L A T I O NCLAMP INSTALLATIONThis fixture features a mounting point on the yoke for the attachment of a mounting clamp. There isalso a safety cable loop located on the rear of the fixture above the DMX ports (see the illustrationbelow). When mounting the fixture to a truss or any other suspended or overhead installation, be sureto secure an appropriately rated clamp (not included) to the yoke, and attach a separate SAFETYCABLE of the appropriate weight rating to the safety cable loop. If the barrel and/or barndoor acces-sories are attached, each accessory must also be secured using its own appropriately rated safetycable, securely and independently looped around the fixture’s mounting yoke as shown in the illustra-tion below. Please refer to the Accessory Installation section of this manual for detailed informationregarding the installation process for these accessories.SAFETY CABLE:ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN ASUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL NOT FALL IFTHE CLAMP FAILS. WHEN BARREL AND/OR BARNDOORS ARE INSTALLED, EACHACCESSORY MUST ALSO BE FITTED WITH ITS OWN SEPARATE SAFETY CABLE.MOUNTINGCLAMPFIXTURESAFETYCABLELOOPBARNDOORSAFETYCABLELOOPBARRELSAFETYCABLELOOPSAFETY CABLESFOR ACCESSORIESLOOPED AROUNDYOKE