ADJ GOBO PROJECTOR IR User Manual
Also see for GOBO PROJECTOR IR: User instructions
            |
6PRECAUTIONSSafety Issue: This unit may blow the fuse if the maximum allotted load of 1 amp is reached.Please refer to the Fuse Replacement section of this manual for detailed instructions.• Ensure that the voltage of the power source matches the required voltage of the unit.• Disconnect from main power before making any type of connection.• Do not remove the cover for any reason. There are no user serviceable parts inside.• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6”(15cm) between this device and a wall.• To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.• This unit is intended for indoor use only, and use of this product outdoors voids all warranties.• During long periods of non-use, disconnect the unit from power.• Always mount this unit in safe and stable matter.• Power-Cord Protection - Power-supply cords should be routed so that they are not likely to bewalked on or pinched by items placed upon or against them, paying particular attention to cords atplugs, convenience receptacles, and the point where they exit from the fixture.• Do not attempt to remove or break off the ground prong from the electrical cord. This prong isused to reduce the risk of electrical shock and fire in the event of an internal short.• The fixture should be serviced by qualified service personnel when:A. The power cord or the plug has been damaged.B. Objects have fallen onto, or liquid has been spilled into, the appliance.C. The appliance has been exposed to rain or water.D. The fixture does not appear to operate normally or exhibits a marked change in performance. |
Related manuals for ADJ GOBO PROJECTOR IR
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine