ADJ Mega Go Flood Par HO User Instructions

Contents

ADJ Products, LLC - www.adj.com - Mega Go Flood Par HO User Manual Page 13Mega Go Flood Par HO Operating InstructionsOnce you have set your desired color change speed, press theSET UP button to move on to “F-XX” (color fade). Use the UP orDOWN buttons to set the color fade speed to “F-00”. This meansthe color fade is off, and the fixture will now color change atthe speed you have set. To run the fixture in color fade, reversethe instructions. Set your color fade speed and set the colorchange speed to “SP.01”.Static Color Mode:1. Plug the fixture in and press the MODE button until “CLXX” isdisplayed.2. There are 35 colors to choose from. Select your desired color bypressing the UP and DOWN buttons. After you have selected yourdesired color you can activate strobing by pressing the SET UPbutton to enter the Flash (strobe) mode.3. “FS.XX” will be displayed, this is Flash mode. The Flash can beadjusted between “FS.00” (flash off) to “FS.15” (fastest flash).Auto Run Default:This will reset the Auto Run mode back to the default settings.1. Plug the fixture in and press the MODE button until “dXX” is dis-played. “XX” represents either “on” or “oFF”.2. Press the SET UP button until “dEFA” is displayed.3. Press the UP and DOWN buttons simultaneously. Press theMODE button to exit.ADJ RFC (Remote Control) On/Off:This function is used to activate and deactivate the ADJ RFC (RemoteControl). When this function is activated you can control the fixtureusing the ADJ RFC. Please see page 15 for the controls and func-tions.1. Plug the fixture in and press the MODE button until “dXX” is dis-played. “XX” represents either “on” or “oFF”.2. Press the SET UP button until “rFXX” is displayed. “XX” repre-sents either “on” or “oF”.3. Press the UP or DOWN buttons to either activate the remote func-tion (On) or deactivate it (Off).ADJ Products, LLC - www.adj.com - Mega Go Flood Par HO User Manual Page 12Mega Go Flood Par HO Operating InstructionsRGB Dimmer Mode:1. Plug the fixture in and press the MODE button until:2. When “r.XXX” is displayed you are in Red dimming mode. Pressthe UP and DOWN buttons to adjust intensity.3. When “G.XXX” is displayed you are in Green dimming mode.Press the UP and DOWN buttons to adjust intensity.4. When “b.XXX” is displayed you are in Blue dimming mode. Pressthe UP and DOWN buttons to adjust intensity.5. After you have adjusted the RGB colors to make your desiredcolor you can then activate strobing by pressing the SET UP but-ton to enter the Flash (strobe) mode.6. “FS.XX” will be displayed, this is Flash mode. The Flash can beadjusted between “FS.00” (flash off) to “FS.15” (fastest flash).Sound Active Mode:In this mode the Mega Go Flood Par HO will react to sound, andchase through the different colors.1. Plug the fixture in and press the MODE button until “SoXX” is dis-played. “XX” represents the sound active mode (1-15) currentlydisplayed.2. The fixture will now change via sound.3. Press the SET UP button to adjust the sound sensitivity. “SJ-X”should be displayed. Use the UP or DOWN buttons to adjust thesensitivity. “SJ-1” is the lowest sensitivity, “SJ-8” is the highest.Auto Run Mode:In this mode the Mega Go Flood Par HO will run 1 of 16 auto pro-grams. The auto run program can be either a fade program or a sim-ple color change program.1. Plug the fixture in and press the MODE button until “APXX” is dis-played. “XX” represents the program number (1-16) currently dis-played.2. After you have chosen your desired program you need to decideif you would like the program to fade through colors or simplychange. Press the SET UP button until either “SP.XX” (colorchange speed) or “F-XX” (color fade speed) is displayed.3. If you select color change, use the UP and DOWN buttons toadjust the speed between “SP.01” (slowest) and “SP.99” (fastest).