ADJ Ricochet User Instructions

ADJ Products, LLC - www.adj.com - Ricochet Instruction Manual Page 14ADJ Products, LLC - www.adj.com - Ricochet Instruction Manual Page 13Ricochet ADJ UC IR ControlThe UC IR (sold separately) infrared remote gives you control ofvarious functions (See below). To control the fixture you must aimthe remote at the front of the fixture and be no more then 30 feetaway.STAND BY - Pressing this button will blackout the fixture.FULL ON - Press this button for full intensity. Once the button is re-leased it will return normal intensity.FADE/GOBO - This button is invalid for this fixture.“DIMMER +” and “DIMMER -” - Use these buttons to adjust the out-put intensity.STROBE - This button is invalid for the fixture.COLOR - Press this button and use buttons 1-9 to adjust speed anddirection.1-9 - When Show 0 is pressed, buttons 1-6 will allow you to select ashow mode to run. When the Color button is pressed, buttons 1-9 willcontrol speed and direction.SOUND ON & OFF - Use the buttons to activate and deactivatesound active mode.SHOW 0 - This activates the show mode. Use buttons 1-6 to selectyour desired show.Ricochet DMX ControlUniversal DMX Control: This function allows you to use a univer-sal DMX-512 controller to control the master dimmer, rotation andcolor. A DMX controller allows you to create unique programs tailoredto your individual needs.1. The Ricochet has 2 DMX channel modes; 12 & 15 channels. Seepages 15-22 for detailed description of the DMX values and traits.2. To control your fixture in DMX mode, follow the set-up procedureson pages 5-6 as well as the set-up specifications that are includ-ed with your DMX controller. Follow the instructions on page 8 toset the DMX address.3. Use the controller’s faders to control the various DMX fixture traits.4. For longer cable runs (more than a 100 feet) use a terminator onthe last fixture.5. For help operating in DMX mode consult the manual includedwith your DMX controller.Ricochet Master-Slave ConfigurationMaster-Slave Configuration This function will allow you to link upto 16 units together and operate without a controller. In a Master-Slaveset up one unit will act as the controlling unit and the others will reactto the controlling units programs. Any unit can act as a Master or as aSlave.1. Using approved DMX data cables, daisy chain your units togeth-er via the XLR connector on the rear of the units. Remember theMale XLR connector is the input and the Female XLR connectoris the output. The first unit in the chain (master) will use the femaleXLR connector only - The last unit in the chain will use the maleXLR connector only. For longer cable runs we suggest a termina-tor at the last fixture.2. Set the Master unit to your desired show. Next, press the MENUbutton until “Slave Mode” is displayed, and press ENTER. Pressthe UP or DOWN buttons so that “Master” is displayed and pressENTER.3. On the slave units press the MENU button until “Slave Mode” isdisplayed, and press ENTER. Press the UP or DOWN buttons sothat either “Slave 1” or “Slave 2” is displayed and press ENTER.4. The slave units will now follow the Master unit.