ADJ SABER SPOT WW User Instructions

ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 22Saber Spot WW CleaningSaber Spot WW Trouble ShootingTrouble Shooting: Listed below are a few common problems thatyou may encounter, with solutions.No light output in WW Dimmer Mode;1. Be sure the strobe setting is set to value 255.Due to fog residue, smoke, and dust cleaning the internal and exter-nal optical lenses and mirror should be carried out periodically tooptimize light output. Cleaning frequency depends on the environ-ment in which the fixture operates (I.e. smoke, fog residue, dust,dew). In heavy club use we recommend cleaning on a monthly basis.Periodic cleaning will ensure longevity, and crisp output.1. Use normal glass cleaner and a soft cloth to wipe down the out-side casing.2. Use a brush to wipe down the cooling vents and fan grill.3. Clean the external optics with glass cleaner and a soft cloth every20 days.4. Clean the internal optics with glass cleaner and a soft cloth every30-60 days.5. Always be sure to dry all parts completely before plugging the unitback in.With this feature you can connect the fixtures to one anotherusing the PowerCON input and output sockets. The quantity thatcan be connected is 36 fixtures maximum @ 110V and a maxi-mum 65 fixture’s @ 240V. After maximum limit has been reachedyou will need to use a new power outlet. They must be the samefixtures. DO NOT mix fixtures.Saber Spot WW Power Cord Daisy ChainSaber Spot WW Photometric ChartIntensity(LUX)Beam angle 45°00 1 2 3 4 5112234Beam opening(m)34451.660.83 2.49 3.31 4.1445° Diameter (m)Full LEDs 2870 749 330 194 126(double face)frost filterADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 23

/ 14

Related manuals for ADJ SABER SPOT WW