ADJ Vizi Spot LED PRO User Instructions

Contents

Unpacking: Thank you for purchasing the Vizi Spot LED PRO byAmerican DJ®. Every Vizi Spot LED PRO has been thoroughly testedand has been shipped in perfect operating condition. Carefully checkthe shipping carton for damage that may have occurred during ship-ping. If the carton appears to be damaged, carefully inspect your fix-ture for any damage and be sure all equipment necessary to operatethe unit has arrived intact. In the event damage has been found or partsare missing, please contact our toll free customer support number forfurther instructions. Please do not return this unit to your dealer with-out contacting customer support first.Introduction: The Vizi Spot LED PRO is a compact, bright, movinghead, DMX intelligent fixture. The Vizi Spot LED PRO can be either a10 or 12 Channel DMX unit. The fixture can operate in three differentoperating modes; show mode, sound-active, or under DMX Control.The Vizi Spot LED PRO can be used as a stand alone unit or in amaster/slave configuration. For best results use fog or special effectssmoke to enhance the beams projections.Customer Support: American DJ® provides a toll free customersupport line, to provide help and to answer any question should youencounter problems during your set up or initial operation. You mayalso visit us on the web at www.americandj.com for any comments orsuggestions. Service Hours are Monday through Friday 8:00 a.m. to4:30 p.m. Pacific Standard Time.Voice: (800) 322-6337Fax: (323) 582-2941E-mail: support@americandj.comTo purchase parts online visit http://parts.americandj.comWarning! To prevent or reduce the risk of electrical shock or fire, donot expose this unit to rain or moisture.Warning! This may cause severe eye damage. Avoid looking directlyinto the light source at all times!Vizi Spot LED PRO IntroductionFor Your Own Personal Safety, Please Read and Understand ThisManual Completely Before You Attempt To Install Or OperateThis Unit!• To reduce the risk of electrical shock or fire, do not expose this unitrain or moisture• Do not spill water or other liquids into or on to your unit.• Do not attempt to operate this unit if the power cord has beenfrayed or broken.• Do not attempt to remove or break off the ground prong fromthe electrical cord. This prong is used to reduce the risk of electricalshock and fire in case of an internal short.• Disconnect from main power before making any type of connection.• Do not remove the cover under any conditions. There are no userserviceable parts inside.• Never operate this unit when it’s cover is removed.• Always be sure to mount this unit in an area that will allow properventilation. Allow about 6” (15cm) between this device and a wall.• Do not attempt to operate this unit, if it becomes damaged.• This unit is intended for indoor use only, use of this product out-doors voids all warranties.• Always mount this unit in safe and stable matter.• Power-supply cords should be routed so that they are not likely tobe walked on or pinched by items placed upon or against them,paying particular attention to cords at plugs, convenience recep-tacles, and the point where they exit from the appliance.• Cleaning -The fixture should be cleaned only as recommended bythe manufacturer. See page 51 for cleaning details.• Heat -This fixture should be situated away from heat sources suchas radiators, heat registers, stoves, or other appliances (includingamplifiers) that produce heat.• The fixture should be serviced by qualified service personnel when:A. Objects have fallen, or liquid has been spilled into the appliance.B. The appliance has been exposed to rain or water.C. The appliance does not appear to operate normally or exhibits amarked change in performance.Vizi Spot LED PRO Safety PrecautionsAmerican DJ® - www.americandj.com - Vizi Spot LED PRO - Instruction Manual - Page 4American DJ® - www.americandj.com - Vizi Spot LED PRO - Instruction Manual - Page 3