ADJ Vizi Spot LED PRO User Instructions

Contents

American DJ® - www.americandj.com - Vizi Spot LED PRO - Instruction Manual - Page 18American DJ® - www.americandj.com - Vizi Spot LED PRO - Instruction Manual - Page 17VER (Version) - Displays the software versionADJU - Calibration functionsEDIT MENU -SEPR (AUTO IP01 - IP07) - Lets you edit any of the 7 internalprograms.STEP (S-01 - S-48) - These are the steps slots that you writeyour programs into. There are at total of 48 steps. See edit pro-gram.SCXX (SC01 - SC30) - These are the scenes that are stored inyour program. There are a total of 30 scenes.REC - This will auto save your custom program.RUN - This will run your custom program.Vizi Spot LED PRO System Menu Vizi Spot LED PRO System MenuOn-Board System Menu. The Vizi Spot LED PRO ccomes with aneasy to navigate system menu. This next section will detail the func-tions of each command in the system menu.To access the main menu press the MODE/ESC button (3) on the frontof the unit. Tap the UP (4) or DOWN (5) butons until you reach functionyou wish to change. When you reach the function you wish to changetap the ENTER button. Again, tap the UP or DOWN buttons to changethe function. Once your changes are made, tap the ENTER button tolock the change in the system, if the ENTER button is not selectedwithin eight seconds the system will automatically return to menu sec-tion. To exit without making any changes tap the MODE/ESC button.ADDR MAIN MENU -ADDR DMX Address Setting via control board -1. Access the main menu.2. Tap the UP button until “ADDR” is displayed, press ENTER.4. Now the display will show “A001”. Adjust the DMX addressby pressing the UP or DOWN buttons.5. Press ENTER to confirm.6. Press the MODE/ESC button to return to the main menu.When the display is on “A001”, you can directly press the UPor DN buttons to change the DMX start address.TEST MAIN MENU -TEST - This will test the functions of each channel.1. Access the main menu.2. Tap the UP button until “TEST” is displayed, press ENTER.3. The display will show “T-01”. You can now press the upbutton and test the different channels.