ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 8WiFly QA5 IP Operating Instructions3. When “G.XXX” is displayed you are in Green dimming mode.Press the UP and DOWN buttons to adjust intensity.4. When “b.XXX” is displayed you are in Blue dimming mode. Pressthe UP and DOWN buttons to adjust intensity.5. When “A.XXX” is displayed you are in Amber dimming mode.Press the UP and DOWN buttons to adjust intensity.6. After you have adjusted the RGBA colors to make your desiredcolor you can then activate strobing by pressing the SET UP but-ton to enter the Flash (strobe) mode.7. “FS.XX” will be displayed, this is Flash mode. The Flash can beadjusted between “FS.00” (flash off) to “FS.15” (fastest flash).Auto Change Mode:1. Plug the fixture in and press the MODE button until “AJXX” isdisplayed. “XX” is the displayed Color Change program that isrunning.2. Use the UP and DOWN button to scroll through the different pro-grams.3. After you have chosen your desired program press the SET UPbutton. “SP.XX” will be displayed. When this is displayed youcan adjust the running speed of your selected program. Use theUP or DOWN button to adjust the speed between “SP.01” (slow-est) and “SP.16” (fastest). Once you have set your desired runningspeed, press the SET UP button to return to your selected AutoChange Mode.Auto Fade Mode:1. Plug the fixture in and press the MODE button until “AFXX” isdisplayed. “XX” is the displayed Color Change program that isrunning.2. Use the UP and DOWN button to scroll through the different pro-grams.3. After you have chosen your desired program press the SET UPbutton. “SP.XX” will be displayed. When this is displayed youcan adjust the running speed of your selected program. Use theUP or DOWN button to adjust the speed between “SP.01” (slow-est) and “SP.16” (fastest). Once you have set your desired runningspeed, press the SET UP button to return to your selected AutoFade Mode.ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 19When Channel 7 is between the values of 0-51, Channels 1-4 areused, and Channel 6 will control strobing.When Channel 7 is between the values of 52-102, Channel 8 is inColor Macros Mode, and Channel 6 will control strobing.When Channel 7 is between the values of 103-153, Channel 8 is inColor Change Mode, and Channel 9 will control the color changespeed.When Channel 7 is between the values of 154-204, Channel 8 isin Color Fade Mode, and Channel 9 will control the color fadespeed.When Channel 7 is between the values of 205-255, Channel 8 is inAuto Run Mode, and Channel 9 will control the auto run speed.Channel Value Function10 DIMMER CURVES0 - 20 STANDARD21 - 40 STAGE41 - 60 TV61 - 80 ARCHITECTURAL81 - 100 THEATER101 - 255 DEFAULT TO UNIT CURVE SETTINGWiFly QA5 IP 10 Channel - DMX Values & Functions