ADJ X-SCAN LED PLUS User Instructions

American DJ® - www.americandj.com - X-Scan LED™ Instruction Manual Page 11 American DJ® - www.americandj.com - X-Scan LED™ Instruction Manual Page 12Operating Modes: The X-Scan LED™ can operate in two dif-ferent modes. In each mode you can run the fixture as a standalone fixute or in a master/slave confiugration. This next sectionwill detail the differences in the operating modes.• Sound Active mode -The fixture will react to sound, chasing through the built-in programs.• DMX control mode -This function will allow you to control each individual fixtures traitswith a standard DMX-512 controller such as the Elation® ShowDesigner.™Master-Slave Operation This function will allow you to link up to 16units together and operate without a controller. The units will be soundactivated. In Master-Slave operation one unit will act as the controllingunit and the others will react to the controlling units programs. Any unitcan act as a Master or as a Slave.1. Using approved DMX data cables, daisy chain your units togeth-er via the XLR connector on the rear of the units. Remember theMale XLR connector is the input and the Female XLR connectoris the output. The first unit in the chain (master) will use the femaleXLR connector only - The last unit in the chain will use the maleXLR connector only. For longer cable runs we suggest a termina-tor at the last fixture.2. On the Master unit find your desired show and set that show bypressiing the ENTER button.3. On the slave units tap the MENU button until “SLMD” is dis-played, and Press ENTER.4. The slave units will now follow the Master unit.Universal DMX Control: This function allows you to use a Elation®universal DMX-512 controller to control the chases and patterns,dimmer and strobe. A DMX controller allows you to create uniqueprograms tailored to your individual needs.1. The X-Scan LED™ is a eight DMX channel DMX fixture. Seepages 14-15 for detailed description of the DMX values and traits.2. To control your fixture in DMX mode, follow the set-up procedureson pages 5-7 as well as the set-up specifications that are includ-ed with your DMX controller.X-Scan LED™ OperationDISP - This function will reverse the display 180º.1. Tap the MENU button until “DISP” is displayed, press ENTER.2. Press ENTER to “flip” the display. Press ENTER to “flip” itagain. Press ENTER when you have made your desired setup.TEMP - With this function you can check the temperatureof the fixture.1. Tap the MENU button until “TEMP” is displayed, press ENTER.2. The temperature of the fixture will now be displayed. PressMENU to exit.FHRS - With this function you can display the running timeof the fixture.1. Tap the MENU button until “FHRS” is displayed, pressENTER.2. The running time of the fixture will now be displayed. PressMENU to exit.VER - With this function you can display the version soft-ware of the fixture.1. Tap the MENU button until “VER” is displayed, press ENTER.2. The software version will now be displayed. Press MENU toexitRSET - Use this function to reset the unit.1. Tap the MENU button until “RSET” is displayed, press ENTER.2. The fixture will now resetX-Scan LED™ System Menu