©American DJ® - www.americandj.com - Micro Hypnotic Instruction Manual Page 8©American DJ® - www.americandj.com - Micro Hypnotic Instruction Manual Page 7Micro Hypnotic Laser Warning LabelsCAUTION IMPORTANT! When installing this projector, make surethat it is mounted in a manner that prevents the audience fromlooking directly into the beam, and the beam from striking theaudience.Operating Modes: The Micro Hypnotic has 2 operating modes;sound active mode and auto mode.• Sound Active mode -The fixture will react to sound, chasing through the built-in programs.• Auto Play -This function run automatically run through all of units patterns.Sound Active Mode: This mode allows the unit to run to the beat ofthe music.1. Press the Auto/Sound button. You are in sound active modeif the red LED on the front of the unit flashes and everymovement.Auto Play: This mode allows the unit to run Auto Play.1. Press the Auto/Sound button till the red LED on the front of theunit stays on. You are now in Auto Play.2. Use the speed knob underneath the button to control the speedof the program.Remote Control: Use the included remote to control various func-tions. Please see below for button control.Note: This remote control code has been set for this laser, so thatthe laser can be controlled out of the box. If this code happens to geterased the remote will not work with the unit. Please see the next pageto reset the code and link the laser to the remote again.A Button - Use this button to switch between Auto Play and SoundActive.B Button - Use this button to Blackout the unit.C Button - Use this button to select colors. Either red, green, or red &green.D Button - Use this button to select your desired rotation.Micro Hypnotic OperationCAUTI ON - CLASS 3RLASER RADIATION WHEN OPENAVOID DIRECT EYE EXPOSURE12mm40mmAVOID EXPOSURELASER RADIATIONIS EMITTED FROMTHIS APERTURE20mm40mm17mm40mmAmerican DJ Supply,Inc.6122 S.Eastern Ave.Los Angeles. CA 90040 USAManufactured:Specification stickersLASER RADIATION AVOIDDIRECT EYE EXPOSUREMaximum output <5 mWWavelength: 650, 532nmClass IIIa laser productThis device complies with 21 CFR chapter I,Subchapter J, or CFR 1040.10 and 1040.1130 mm41 mm