ADJ micro hypnotic User Instructions

©American DJ® - www.americandj.com - Micro Hypnotic Instruction Manual Page 9 ©American DJ® - www.americandj.com - Micro Hypnotic Instruction Manual Page 10Fixture Cleaning: Due to fog residue, smoke, and dust cleaningthe internal and external lenses should be carried out periodically tooptimize light output.1. Use normal glass cleaner and a soft cloth to wipe down the out-side casing.2. Clean the external optics with a microfiber cloth every 20 days.3. Always be sure to dry all parts completely before plugging theunit back in.Cleaning frequency depends on the environment in which the fixtureoperates (I.e. smoke, fog residue, dust, dew). In heavy use we recom-mend cleaning on a monthly basis. Periodic cleaning will ensure lon-gevity, and crisp beam output.Micro Hypnotic CleaningMicro Hypnotic Trouble ShootingTrouble Shooting: Listed below are a few common problems thatyou may encounter, with solutions.No laser output from the unit;1. Be sure you have connected your unit into a standard walloutlet.2. Be sure that the unit is not in blackout mode.3. In cold temperature situations it might take the laser a little longerto produce output. It can take up to 3-5 minutes for the laser toproduce a beam. This is due to the laser diode which is very sen-sitive.Unit does not respond to sound;1. Low frequencies (bass) should cause the unit to react to sound.Tapping on the microphone, quiet or high pitched sounds maynot activate the unit.Micro Hypnotic Laser Remote ResetFollow these simple instructions to reset your remote code.Erase Remote Code:Using a small pointy utensil, carefully press and hold the whitebutton (2), while doing this the indicator light (1) will glow for about 5seconds then turn off. Once the indicator light turns off release thebutton (2).Activating and Linking Remote:This action will set the code to link the laser to your remote. You canlink more then one laser to a remote.Using a small pointy untensil, carefully press the white button (2)and then press any button on the remote control. After pressing thebutton on the remote control the indicator light (1) will flash 4 times.Try to control the unit with the remote. If the unit can be controlled,setting the code was successful. If it does not control the unit, tryagin.12

/ 6

Related manuals for ADJ micro hypnotic