– 14 –Quick Start (cont’d)To view current alarms, perform the following steps:1 Using the operating panel’s numeric keypad, enter a valid ID code todisplay the Action Menu 1 (see page 19) if no burglary groups are on; orpress the “Turn off” selector button (if burglary groups are on) todeactivate all annunciating devices.2 If any burglary groups are on, complete the steps under “Turning OffBurglary Protection” in the SYSTEM OPERATION section. When allburglary groups are off, press Continue to display Action Menu 1.3 Press See alarms to display the alarm type, point number, anddescription.4 Press Prev or Next to display additional alarms.5 Press Quit to display Action Menu 1.Entering Your Personal ID NumberThe first step in performing any function within the FOCUS 200 PLUSsystem is to enter your personal six-digit ID number.To enter a valid ID code, perform the following steps:1 Enter your six-digit personal ID number. You should hear a short beepafter each digit is entered. After your number has been accepted, you willhear a longer beep.2 Now wait about 15 seconds and try to enter another, random six-digitnumber. What happens now?The number is recognized as an invalid ID code and the operating panelwill display “Code Incorrect, Try Again.”3 If you make a mistake, press “Clear” to re-enter the number.The operating panel is active for 10 seconds after a valid code is entered. Youmust enter a menu selection within that time or the operating panel willdeactivate, requiring the input of a valid ID code again. Once you haveselected a menu item, however, the panel remains active for a full minutebefore becoming inactive. This timeout feature automatically secures yourFOCUS 200 PLUS security system in the event of a distraction oremergency that causes you to step away from the operating panel.