ADT Focus 200 Plus User Manual

Also see for Commercial Fire & Burglary Alarm System FOCUS 200 PLUS: User guide Installation and setup guide

Contents

ADT Focus 200 Plus User Manual Manual pdf 53 page image

– 53 –System OperationYour FOCUS 200 PLUS security system is controlled through operatingpanels conveniently located throughout your facility. See SYSTEMOPERATION OVERVIEW section for detailed operating instructions and adescription of the operating panel.Turning On Burglary ProtectionTurning on burglary protection will probably be the most used (and mostimportant) operation for most sites. Take extra time to practice securing andexiting your premises. Make sure other operators you depend on for siteclosings do the same.If the operating panel is located within the protected area, you must enterand exit the premises through a pre-determined entry/exit door. If yoursystem is programmed with an audible exit delay warning, the operatingpanel will beep (once every second) during the exit delay period. You mustexit the protected area and close the exit door securely before the exit delayexpires. A 4-second steady tone indicates the expiration of the exit delay. Ifyou are detained and hear the 4-second tone, return to the operating panel,re-enter your ID code, and repeat the process for exiting. If there is no exitdelay warning programmed for the group you are in, but you are armingmultiple groups, some of which have exit delay warning, you will hear theexit delay warning at your keypad.Note: If you do not exit the protected area prior to the expiration of the exitdelay, an “exit fail” signal will be transmitted to the ADT CustomerMonitoring Center.The system can be turned on in either the AWAY or STAY mode. The STAYmode automatically bypasses certain point types. Check with your ADTservice technician to see if your system contains any of these point types.Turning On ALL Burglary GroupsBefore turning on, be sure to secure (or bypass) all protection points.1. Using the operating panel’s numeric keypad, enter a valid ID code todisplay Action Menu 1.