ADT Security Manager 3000 User Manual
Also see for SafeWatch 3000: Installaton guideBATTERY REPLACEMENT INSTRUCTIONSProgramming guide
                                                        | |
– 37 –7URXEOH&RQGLWLRQV"Check" and"Battery" Displays* Not all systemsuse wirelesssensors.The word CHECK on the touchpad's display, accompanied by a"beeping" at the touchpad, indicates a trouble condition in thesystem.To silence the beeping for these conditions, press any key.1. A display of "CHECK" and one or more zone numbersindicates that a problem exists with the displayed zone(s) andrequires your attention. Determine if the zone(s) displayed areintact and make them so if they are not. If the problem has beencorrected, the display can be cleared if you enter the OFFsequence (security code plus OFF key) twice. If the displaypersists, CALL FOR SERVICE.Note: A display of CHECK 70 on English Display touchpadsindicates that the wiring connection to the external sounder isat fault (opened or shorted), and you should CALL FORSERVICE. See “BELL FAILURE” on next page. A display ofCHECK 90 indicates that RF interference may be impeding theoperation of wireless sensors* in the system. See “Rcvr Jam”on next page.2. If there are wireless sensors* in your system, the CHECKcondition may also be caused by some change in theenvironment that prevents the wireless receiver from hearing aparticular sensor. CALL FOR SERVICE if this occurs.IF YOU CANNOT CORRECT A "CHECK" DISPLAY,CALL FOR SERVICE.TYPICAL "CHECK" DISPLAYS06CHECKACENGLISH DISPLAYTOUCHPAD' , ) ' / & ) ( 6 3 3 1 ; - 2 ( 3 ;CUSTOM ENGLISH DISPLAYTOUCHPAD |
Related manuals for ADT SafeWatch 3000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine