ADTRAN 1202361L2 Hardware Installation Manual
                                      | |
Contents
| 
Unit Installation NetVanta 2000 Series Hardware Installation Guide26 Copyright © 2006 ADTRAN, Inc. 61202361L2-34DWall Mounting NetVanta 2000 Series Internet Security AppliancesNetVanta 2050, NetVanta 2054, and NetVanta 2100Figure 9. Wall Mounting the NetVanta 2050, NetVanta 2054, or NetVanta 2100Instructions for Wall Mounting NetVanta 2050, NetVanta 2054, or NetVanta 2100Step Action1 Decide on a location for the NetVanta. Mount the unit at or below eye-level so that the LEDs areviewable.2 Prepare the mounting surface by attaching a board (typically plywood, 3/ 4- to 1-inches thick) toa wall stud.Important! Mounting to a stud ensures stability. Using sheetrock anchors may not providesufficient long-term stability.3 Install two #8 (1 1/ 2 inches or greater in length) wood screws into the mounted board followingthese guidelines and referring to Figure 9:• Screws should be spaced horizontally, approximately 5 inches apart. Find exact positioningby using the location of the two keyed insets on the bottom of the NetVanta as a guide. Youcan also use the Mounting Template located on your ADTRAN OS System DocumentationCD.• Screws should be horizontally level with each other.• Leave approximately 1/4 inch of the screws protruding from the board to allow the heads ofthe screws to slide into place in the unit’s keyed insets.4 Slide the keyed insets on the bottom of the NetVanta chassis securely onto the screws.5 Proceed to the steps given in Supplying Power to the Unit on page 29. |
Related manuals for ADTRAN 1202361L2
manualsdatabase
Your AI-powered manual search engine