Appendix E. Terminal Mode Commands61202070L4-20 Express L128FP User Manual E-3ADDITIONAL COMMANDSOther commands available from the terminal mode are listed below:DOWNLOAD/UPLOADINGCONFIGURATIONThe Express L128FP’s configuration can be captured to a text file usingthe download command. The text file can be edited if required. Up-load of the configuration can be accomplished by sending the text fileto the Express L128FP in terminal mode. A baud rate of 9600 is strong-ly recommended when uploading. As soon as the upload has beencompleted, type save to save the new configuration to flash. A resetcommand or power cycle 10 seconds after the save command is rec-ommended to ensure that the new configuration is complete.save Saves the configuration to non-volatile RAM (flash).mac Returns the MAC address for the Express L128FP.version Returns the firmware version and routing stackversion.reset Resets the unit.exit Leaves terminal mode and returns to menus.download Downloads complete configuration to the terminalscreen for capture.