ADTRAN NetVanta 1000 Series Hardware Installation Manual

Also see for NetVanta 1000R Series: Command reference guide

ADTRAN NetVanta 1000 Series Hardware Installation Manual Manual pdf 41 page image

NetVanta 1000/1000R Series Hardware Installation Guide Unit Installation61200500L1-34J Copyright © 2006 ADTRAN, Inc. 415. UNIT INSTALLATIONThe instructions and guidelines provided in this section cover hardware installation topics such asmounting options, supplying power to the unit, and installing option cards. These instructions arepresented as follows:• Mounting Options on page 42• Supplying Power to the Unit on page 44• Installing Dial Backup and Network Interface Modules on page 46• Installing the NetVanta VPN Accelerator Card (P/N 1202368L1) on page 48For information on configuring a specific application, refer to the quick configuration documents providedon your ADTRAN OS System Documentation CD or the Command Line Reference Guide (also included onyour CD).Tools RequiredThe customer-provided tools required for the hardware installation of the NetVanta are:• Ethernet cables• Network cables (module dependent)• DSX-1 cable (T1/FT1 + DSX-1 module only)• DBU cable (dial backup functions require an optional DIM)• Phillips-head screwdriver (rack-mounted applications only)To prevent electrical shock, do not install equipment in a wet location or during alightning storm.Electronic modules can be damaged by static electrical discharge. Before handlingmodules, put on an antistatic discharge wrist strap to prevent damage to electricalcomponents. Place modules in antistatic packing material when transporting or storing.When working on modules, always place them on an approved antistatic mat that iselectrically grounded.To access the command line interface (CLI) of the NetVanta, you will also need a VT100terminal or PC with terminal emulation software and a console port cable. Instructions onhow to access the CLI are given in the Command Reference Guide (provided on theADTRAN OS System Documentation CD).