ADTRAN NetVanta 1000 Series Hardware Installation Manual

Also see for NetVanta 1000R Series: Command reference guide

ADTRAN NetVanta 1000 Series Hardware Installation Manual Manual pdf 48 page image

Unit Installation NetVanta 1000/1000R Series Hardware Installation Guide48 Copyright © 2006 ADTRAN, Inc. 61200500L1-34JInstalling the NetVanta VPN Accelerator Card (P/N 1202368L1)The optional VPN Accelerator card plugs into a 32-bit PCI slot and is designed to be used in theNetVanta 1224STR to provide encryption/decryption and security acceleration services. The card providesthe following security services to the host processor: DES, triple-DES (3DES), AES, SHA-1, MD5, andrandom number generation. Performance metrics include 528 Mbps (DES), 176 Mbps (3DES), and422 Mbps (AES). The power consumption of the card does not exceed 2 watts.Figure 26. NetVanta VPN Card InstallationThe NetVanta VPN accelerator card is intended to be serviced/installed by qualified servicepersonnel only.Instructions for Installing the NetVanta VPN Accelerator CardStep Action1 Remove power from the unit.2 Remove the nine screws and, if necessary, two mounting brackets (see Figure 26).3 Using a 3/16-inch hex driver, remove the two jack screws located on either side of the DB-9 port.4 Carefully lift and remove the unit’s cover to expose the circuit board.5 Gently slide the accelerator card into the PC card slot as shown. The card is keyed to fit into theslot only one way. To avoid damaging the card pins, do not use excessive force.6 Replace the unit cover, screws, and mounting brackets.7 Restore power to the unit.