ADTRAN NetVanta 5305 Hardware Installation Manual

Also see for NetVanta 5305: Hardware installation guide Quick start guide Quick start guide Quick reference guide Specifications

ADTRAN NetVanta 5305 Hardware Installation Manual Manual pdf 26 page image

Unit Installation NetVanta 5305 Hardware Installation Guide26 Copyright © 2010 ADTRAN, Inc. 61200990L1-34N4. UNIT INSTALLATIONThe instructions and guidelines provided in this section cover hardware installation topics, such as rackmounting the unit and installing option cards. These instructions are presented as follows:• Rack Mounting NetVanta 5305 on page 27• Installing Modules on page 28• Supplying Power to the Unit on page 29• Installing the NetVanta VPN Accelerator Card (included in P/N 4200368L1) on page 31For information on configuring a specific application, refer to the quick configuration documents provided onyour AOS Documentation CD. For details on the CLI, refer to the AOS Command Reference Guide (alsoincluded on the CD).Tools RequiredThe customer-provided tools required for the hardware installation of the NetVanta 5305 are:• Ethernet cable• Phillips-head screwdriver• AMP P/N 59250 crimping tool or equivalentTo prevent electrical shock, do not install equipment in a wet location or during alightning storm.The NetVanta 5305 system is intended to be installed, maintained, and serviced byqualified service personnel only and should be installed in a restricted access location asdescribed in UL/IEC 60950-1.To access the CLI of the NetVanta 5305, you will also need a VT100 terminal or PC withterminal emulation software and a C ONSOLE port cable. Instructions on how to access theCLI are given in the AOS Command Reference Guide (provided on the AOSDocumentation CD).