ADTRAN NetVanta 6355 PoE Installation Manual

Also see for NetVanta 6355 PoE: Quick reference guide

Contents

ADTRAN NetVanta 6355 PoE Installation Manual Manual pdf 23 page image

NetVanta 6355 PoE Hardware Installation Guide Option Modules61200740E1-34D Copyright © 2011 ADTRAN, Inc. 23Network Interface ModulesNetVanta T1/FT1 NIM (P/N 1202862L1)The NetVanta T1/FT1 NIM (see Figure 3) provides a T1 WAN interface for the NetVanta. This module providesa full T1 or fractional T1 network interface. See Table 6-5 on page 45 for the WAN-T1 connector pinouts. Anoptional DIM is required for dial backup applications. Dial backup is not supported at this time.Figure 3. NetVanta T1/FT1 NIMWAN-T1 DBUFeatures and SpecificationsOperating Modes• Frame Relay, Multilink Frame Relay• PPP, MLPPP• HDLCT1/FT1 Interface• Supported Standards: AT&T TR 62411,AT&T TR 65016, ANSI T1.403,Bellcore TR 194• Line Rate: 1.544 Mbps +75 bps• Line Code: AMI or B8ZS• Framing: D4 (SF) or ESF• FT1 Line Rate: DS0 channelized (multiplesof 64 kbps)• Input Signal: 0 to -36 dB (DS1)• Line Build-Out: 0, -7.5, -15, -22.5 dB(long), 0 to 655 ft (short)• DS0 Assignment: Programmable• Connector: RJ-48CClock Source• Line• InternalDiagnostics• Test Pattern Generation and Detection:511, QRSS, all ones, all zeros• Network loopbacks (local and remote);responds to both inband and FDL loopcodes• Alarm generation and detection• Network and user sets of performance data(15 minutes and 24 hours)Compliance• EMC - see Electromagnetic Compatibility(EMC) Table on page 6.• ACTA/FCC Part 68• IC CS-03• UL/CUL 60950Environmental• Operating Temperature: 0°C to 50°C• Storage Temperature: -20°C to 70°C• Relative Humidity: Up to 95 percent,noncondensingPhysical• Dimensions: 2.75-inch W x 4.25-inch D