INTEGRA TELECOM SIP SOLUTIONSIP PBX Configuration Settings, Notes, & Recommendations26 of 45Step 11(c): Configure Codec List — The “Codec Lists > New Codec List” page is displayed asshown below. In the “Add New Codec List” section, enter a user defined name for the new CodecList in the “Codec List Name:” text box. In this example, “G729 and G711u” was entered for the CodecList Name. This is outlined in blue below.Next, select “G.729” from the drop down menu list as the entry for “Codec #1:” Next, select “G.711ulaw” from the drop down menu list as the entry for “Codec #2:” This is outlined in red below.Once configured, as described above, select the “Apply” button to apply the changes and create thenew Codec Group. This is outlined in red below.As shown below, the “Codec Lists” page is displayed. Note: At the bottom of the section, the successmessage is displayed: “Codec List “G719 and G711u” updated successfully.”
