ADTRAN NetVanta Analog Modem Dial Backup Interface Module Quick Start Manual

Contents

quick start guide

ADTRAN NetVanta Analog Modem Dial Backup Interface Module Quick Start Manual Manual pdf 1 page image

NETVANTA ANALOG MODEM DIAL BACKUP INTERFACE MODULE (DIM) P/N 1200864L1For more detailed documentation, visit us online at www.adtran.comQuick Start GuideQuick Start Guide, 61200864L1-13B, February 2004 Technical Support 1-888-4ADTRAN (1-888-423-8726)  2004 ADTRAN, All Rights ReservedSPECIFICATIONS• ITU V.90 Compliant• AsyncINSTALLATION INSTRUCTIONS1. Remove power from the base unit.2. If the Network Interface Module (NIM) is already in theNetVanta chassis, release the pins at both edges of theNIM faceplate and slide the module out of the chassis.3. Carefully align the P1 connector on the NIM with the J1connector on the analog modem DIM. Using onlyfingertip pressure so that neither circuit board bends orflexes, ensure that the connectors are firmly seated.Secure the analog modem DIM to the NIM using thescrews and standoff posts supplied.12 VDCPOWERCONSOLELANSLOT 1 NET/D BU 4. Slide the NIM with the analog modem DIM attachedinto the NetVanta option slot until the NIM is firmlyseated against the back of the chassis.5. Secure the pins at both edges of the NIM.6. Connect the cables to the associated device(s).7. Complete installation of the base unit.8. Restore power to the base unit.A NALOG MODEM DBU (RJ-48C) C ONNECTION PINOUTPin Name Description1-3 — Unused4 R Network-Ring5 T Network-Tip6-8 — UnusedI NSTALLATION I NSTRUCTIONS (CONTINUED)

/ 2

Related manuals for ADTRAN NetVanta Analog Modem Dial Backup Interface Module