ADTRAN NetVanta E1/FE1 Network Interface Module Quick Start Manual

Contents

quick start guide

ADTRAN NetVanta E1/FE1 Network Interface Module Quick Start Manual Manual pdf 1 page image

NETVANTA E1/FE1 NETWORK INTERFACE MODULE (NIM) P/N 1200868L1For more detailed documentation, visit us online at www.adtran.comQuick Start GuideQuick Start Guide, 61200868L1-13B, February 2004 ADTRAN Technical Support (+1-256-963-8716) © 2004 ADTRAN, All Rights ReservedSPECIFICATIONSE1/FE1 Interface Line Rate: 2.048 Mbps +/- 50 PPMLine Code: AMI or HDB3Framing: FAS with optional CRC-4Receiver Sensitivity: -30 dBFE1 Line Rate: Timeslot, channelized (inmultiples of 64 kbps)Connector: RJ-48CClock Source Network, InternalDiagnostics Test pattern generation and detection (QRSS,511)Network loopbacksAlarm generation and detectionNetwork performance data (15 minutes and24 hours)I NSTALLATION I NSTRUCTIONS1. Remove power from the unit.2. Slide the Network Interface Module (NIM) into the optionslot until the NIM is firmly seated against the front of thechassis.3. Secure the pins at both edges of the NIM.4. Connect the cables to the associated device(s).5. Complete the installation of the base unit.6. Restore power to the unit.WAN-E1 DBU WAN-E1 NETWORK (RJ-48C) C ONNECTIONPINOUTPin Name Description1 R1 Receive data from the network2 T1 Receive data from the network3 — Unused4 R Transmit data toward the network5 T Transmit data toward the network6-8 — UnusedDBU (RJ-48C) C ONNECTION PINOUTPin Name Description1-2 — Unused3 R1 Network-Ring14 R Network-Ring5 T Network-Tip6 T1 Network-Tip17-8 — UnusedAn optional Dial Backup Interface Module (DIM) isrequired for dial backup applications.

/ 2

Related manuals for ADTRAN NetVanta E1/FE1 Network Interface Module