NetVanta T1/FT1 + DSX-1 Network Interface Module (NIM) P/N 1202863L1For more detailed documentation, visit us online at www.adtran.com.Quick Start Guide®Quick Start Guide, 61200863L1-13D, July 2005 Technical Support 1-888-4ADTRAN (1-888-423-8726) Copyright © 2005 ADTRAN, All Rights ReservedI NSTALLATION I NSTRUCTIONS1. Remove the power from the unit.2. Slide the option module into the option slot until the module isfirmly seated against the chassis.3. Secure the pins at both edges of the module.4. Connect the cables to the associated device(s).5. Complete installation of the base unit.6. Restore power to the unit.NetVanta modules should be installed only inNetVanta Series products.WAN-T1 NETWORK (RJ-48C) C ONNECTION P INOUTSPin Name Description1 R1 Receive data from the network - Ring 12 T1 Receive data from the network - Tip 13 — Unused4 R Transmit data toward the network - Ring5 T Transmit data toward the network - Tip6-8 — UnusedDSX-1 (RJ-48C) CONNECTION PINOUTSPin Name Description1 R Transmit data toward the DTE- Ring2 T Transmit data toward the DTE - Tip3 — Unused4 R1 Receive data from the DTE - Ring 15 T1 Receive data from the DTE - Tip 16-8 — UnusedAn optional Dial Backup Interface Module (DIM) isrequired for dial backup applications.For a description of the DBU pinouts, refer to theQuick Start Guide included with your DIM shipment.Important: For additional details on product features,specifications, installation, and safety, refer to theappropriate Hardware Installation Guide on theADTRAN OS System Documentation CD shippedwith the base unit and available online atwww.adtran.com.WAN-T1 DSX-1 DBUSPECIFICATIONSOperatingModesFrame Relay, Multilink Frame Relay,PPP, Multilink PPP, HDLCT1/FT1InterfaceSupported Standards: AT&T TR 62411, AT&T TR 54016,Bellcore TR.194, ANSI T1.403Line Rate: 1.544 Mbps ±75 bpsLine Code: AMI or B8ZSFraming: D4 (SF) or ESFFT1 Line Rate: DS0 channelized (multiples of 56/64 kbps)Input Signal: 0 to -36 dB (DS1)Line Build-Out: 0, -7.5, -15, -22.5 dB (long), 0 to 655 ft(short)Connector: RJ-48CDS0 Assignment: ProgrammableDSX-1InterfaceSupported Standards: ANSI T1.102Line Rate: 1.544 MbpsDSX Receiver Input Range: -10 dBdsx to +6 dBdsxCapacity: 1 to 24 DS0sLine Codes: AMI, B8ZSDSX-1 interface to PBXFraming: D4 (SF) or ESFLine Length: 0 to 655 ft and -7.5 dBConnector: RJ-48CClock Source Network, internal, and throughDiagnostics Test Pattern Generation and Detection: QRSS, 511, allones, all zerosNetwork loopbacks (local and remote); responds to bothinband and FDL loop codes (T1 interface only)Alarm generation and detectionNetwork and user sets of performance data (15 minutesand 24 hours)Compliance FCC Part 15 Class A, EN 55022 Class AACTA/FCC Part 68, IC CS-03UL/CUL 60950Physical Dimensions: 2.75-inch W x 4.25-inch DOperating Temperature: 0°C to 50°CStorage Temperature: -20°C to 70°CRelative Humidity: Up to 95 percent, noncondensing