ADTRAN SDX 8110-24-740W Quick Start Manual

Contents

Quick StartOverviewThis quick start describes how to install, configure, and troubleshoot the SDX 8110-24-740W, 24-port Managed GbE 740W PoE+ Switch.Figures 1 and 2 show the Front and Rear Panel layouts of the switch.■ “Installing the Switch” on page 1■ “Initially Configuring the Switch” on page 4■ “Power Over Ethernet (PoE)” on page 6■ “Understanding the Status LEDs” on page 6■ “Using the MODE Button” on page 7■ “Troubleshooting the Switch” on page 8Figure 1. Front Panel LayoutFigure 2. Rear Panel LayoutInstalling the SwitchPackage Contents■ SDX 8110-24-740W switch■ AC power cord■ DB-9 to RJ-45 cable■ Micro-USB to USB cable■ Four adhesive rubber feet■ Mounting kit for rack mount (two brackets and eight screws)■ Quick Startf WARNING!The SDX 8110-24-740W is intended for indoor use only. Ethernet, PoE cables and attached equipment are intended for use within thesame building with equa-potential bonding, and not intended to be placed in separate buildings or structures. Failure to deploy asdescribed could result in permanent damage from lightning or other electrical events and voids the warranty.SDX 8110-24-740W SYSTEMLNK/ACT/SPDPoECONSOLEUSBMODE/RESET1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26LINK/ACT/SPDMode LEDSYSLEDCONSOLEPort10/100/1000RJ-45 with PoE+1G/10GSFP+ PortsPoEMode LEDMODEButtonPort StatusLEDsAC Line: 100-240V 50-60HzAC Line: 100-240V 50-60HzPower ConnectionSDX 8110-24-740W24-port Managed GbE 740W PoE+ SwitchJuly 2019617108124PF2-13CP/N: 17108124PF2