Chapter 5. Configuration Menu61202156L2-1 TDU 120e User Manual 5-19Creating a DSO MapTo configure a DS0 Map, perform the following steps:Initializing the Temp MapUpon entering the DS0 maps C ONFIGURATION menu, theTemp map reflects its last configured state.Step Explanation1 Initialize the TEMP Map to one of three configurations(current Map A, current Map B, or all IDLE). This stepis optional.2 Edit the Temp Map so that it reflects the desired mapconfiguration.3 Replace the current DS0 Map A or B configurationwith the Temp map configuration.If you want to... Enter selections...Initialize the Temp map from itscurrent configuration to one whichreflects the currently stored Map Aor B configurations, respectively.1 - 2Initialize the Temp map to an allIDLE state.3
