Chapter 3. Operation61200.076L2-1 TSU 600 User Manual 6 3When Auto is selected the unit displays the screens toset times for switching. See Figure 3-14.@@Figure 3-14Selection Times for Map ExchangeWith the cursor on 1)Map A, press Enter to activatethe selection fields for hour, minute, and second. Thecursor first moves to the hour position. Type innumbers and press Enter. The selected hour is enteredand the cursor moves to the minute position. Setminutes by the same method as used to set the hours.If a number is mistakenly entered, pressing Cancelinterrupts the editing process. The procedure can berestarted to accept correct entries.When using one digit numbers, the number appears inthe first of two spaces. Upon pressing Enter, thesystem moves the single number to the second spaceand fills the first with a zero.After editing Map A, press Enter to record the Map Asettings and activate the selection fields for Map B. Usethe same operation to edit switching time for Map B.After settings for both Maps A and B are completed,press Cancel to returns to 3)MAP XCHNG.Continue with standard operating procedures.When ESF is used with an FDL channel between units, theunits automatically coordinate the automatic map switch bysending a map switch command from end-to-end over theFDL. Only one end needs to be set to Auto for this to work.
