ADTRAN Total Access 600R System Manual

Also see for TOTAL ACCESS 600R: System manual User Interface Guide Specifications User Interface Guide

ADTRAN Total Access 600R System Manual Manual pdf 31 page image

Total Access 600R System Manual Section 3 Network Turnup Procedure61200600L1-1A © 2002 ADTRAN, Inc 311. INTRODUCTIONThis section discusses the unit installation process.2. TOOLS REQUIREDThe tools required for unit installation are:• Screws (customer-provided for wallmount installation)• Screwdriver (for wall or rackmount installation)3. UNPACK AND INSPECT THE SYSTEMEach unit is shipped in its own cardboard shipping carton. Open each carton carefully and avoid deeppenetration into the carton with sharp objects.After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged intransit, immediately file a claim with the carrier, and then contact ADTRAN Customer Service (see thecontact information in the front of this manual).Contents of ADTRAN ShipmentYour ADTRAN shipment of the Total Access 600R includes the following items:• Mounting Instructions (P/N 64200600L1#T-19A)• CD (P/N 32536146@B)• Cable Tie (P/N 3292032)• Silver Satin Cable (P/N 3127004)• Four Rubber Feet (P/N 3270BF003)• Power Cord (P/N 3127009)To prevent electrical shock, do not install equipment in a wet location or during alightning storm.During installation, power should be the last connection made.Electronic modules can be damaged by static electrical discharge. Before handlingmodules, wear an antistatic discharge wrist strap to prevent damage to electricalcomponents. Place modules in antistatic packing material when transporting or storing.When working on modules, always place them on an approved antistatic mat that iselectrically grounded.