ADURO H1 User Manual

Also see for H1: User manual User manual Update manual User manual User manual

Contents

ADURO H1 User Manual Manual pdf 69 page image

69Pellet containerBurn all pellets and brush the container clean.6.3 Periodically maintenance – after about 500 hours of useIf the stove is placed in dusty surroundings, it can be necessary to clean the ventilator. Clean the burningcave for ash and cinders, e.g. with a scraper. Clean the air pathway for electrical igniter for ash and cindersthat might be covering the hole placed on the left side of the tube under the burning cave, e.g. using a small,straight screwdriver.For further information regarding maintenance of the stove, please go to www.adurofire.com.6.4 Yearly maintenanceThe yearly maintenance must be conducted by a professional. Contact your local Aduro GO partner forfurther information.6.5 Other maintenanceGasketsWith time, gaskets around glass and door will wear. We recommend that you inspect them regularly. Ifleakages appear, they must be replaced.Combustion chamberThe fireproof tiles in the combustion chamber eventually wear out and should be replaced when the cracksare more than 0.5 cm. The durability of the tiles depends on how often and how intensively the stove is used.You can change the tiles yourself. They are available as a ready-to-use set. For further information, go towww.aduroshop.com.Cleaning the Aduro H1 & H1 LUXThe stove’s surface is treated with a heat-resistant Senotherm® paint, which will stay at its best just by beingvacuumed with a small, soft mouthpiece or dusted with a soft, dry cloth. Do not use spirit or other solvents, asthey will remove the paint.The inside of the Aduro H1 & H1 LUX and the flue pipe can be cleaned through the door or alternativelythrough the cleaning aperture in the flue pipe/chimney. The upper fireproof tile (the exhaust deflector) can beremoved. To allow free access to the top of the Aduro H1 & H1 LUX and the flue pipe, remove the exhaustdeflector in steel. Cleaning of the inside of the Aduro H1 & H1 LUX and the flue pipe should be undertaken atleast once a year, or more frequently if necessary, depending on how often the Aduro H1 & H1 LUX is used.This work can also be carried out by the chimney sweep or your local Aduro GO partner.Do not clean the hybrid stove with water. If the stove is exposed to moisture,the stove may develop rust.