ADURO H1 User Manual

Also see for H1: User manual User manual Update manual User manual User manual

Contents

ADURO H1 User Manual Manual pdf 67 page image

676. Maintenance of the stovePakningerMed tiden bliver pakningerne slidte og bør derfor efterses. Er de utætte, bør de skiftes.6.1 Daily maintenance – when using pelletsWhen you add pellets, you should brush the burning cave free from of ashes and cinders. Open the door tothe combustion chamber and lift the front of the burning cave (the black cast iron cone with the Aduro logo).Brush the ashes and the cinders through the grate to the ash pan. Avoid brushing ashes and cinders downinto the pellet auger. Put back the front of the burning cave.Empty the ashpan when needed.Burning caveWe recommend two types of maintenance during the week: a short cleaning while the stove is lit (cannot lastmore than 3 minutes because of the sensor in the door) and a thorough cleaning where the stove is turnedoff and cold. We recommend that you conduct the short cleaning 2 times a day and the thorough cleaningevery 4 days.During the short cleaning, the stove must be cleaned under the burning cave. We recommend that you usegloves. By using a tong or a similar tool, you can move the burning cave to the side and clean out ash andcinders. Put the burning cave back in place. During the thorough cleaning, the fireproof tiles must beremoved and the auger and the combustion chamber must be vacuumed thoroughly.6.2 Regularly maintenance – when neededAshesEmpty the ashpan before it gets completely full. Always leave a layer of ashes in the stove because itinsulates and makes it easier to light a fire.Remove the burning cave and clean the top auger for ashes with a vacuum cleaner. This is done easiest bymaking a "paper ring" of paper roll, which is laid around the opening of the auger. Then press the vacuumcleaner muzzle down towards the "paper ring" so it fits tightly. After this, the ashes can be vacuumed up.GlassWet wood, insufficient chimney draft, and wrong use of the hybrid stove can leave soot stains on the glass.They can easily be removed using a damp cloth that you dip in cold ash and rub on the sooty glass. Specialcleaning agents are also available to remove soot from glass, e.g. the Aduro Easy Clean pad. The padneither scratch nor damage the glass and is for multiple usage. Water or other cleaning agents are notnecessary.It is common maintenance to tighten the glass fittings shortly after the stove has been installed as well as tocheck if the gaskets are properly placed.All maintenance and cleaning of the Aduro H1 should be carried out when thestove is cold and power disconnected.