AEDSuperstore HeartStart FRx Manual
                             | |
10PHILIPS MEDIC A L SY ST EM SSELECTING A TRAINING SCENARIO1. Make sure the pads connector is plugged in and the FRx Trainer isturned off. (Press and hold the On/Off button if necessary to turn offthe Trainer.)2. Press the flashing i-button once. The FRx Trainer will tell you how toselect a scenario.3. Press the i-button again to have the FRx Trainer identify the currenttraining scenario. If you want to use this scenario, briefly press theOn/Off button to run the scenario immediately.4. To select a different scenario, press the flashing blue i-button toscroll through each of the eight scenarios in sequence. When youreach the scenario number you want, briefly press the On/Off buttonto run the scenario immediately. Or, to simply select the scenariowithout running it, press and hold the On/Off button until theTrainer turns off, or wait for 10 seconds and it will automatically turnoff.The FRx Trainer will run the selected scenario every time until thebatteries are replaced or until a different scenario is selected. TheTrainer defaults to Scenario 1 each time the batteries are installed.RUNNING A TRAINING SCENARIOTo run the selected training scenario, treat the FRx Trainer exactly as youwould the FRx Defibrillator.1. Press the green On/Off button to turn on the FRx Trainer.2. To practice defibrillation of an infant or child under 8 years or 55pounds (25 kg), insert the Infant/Child Key in the Trainer’s Infant/Child Key slot.NOTE: Inserting or removing the Infant/Child Key during a scenariowill restart the scenario.3. Follow the FRx Trainer’s voice instructions. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine