AEG 210621236-11052010 User Manual

Contents

10. Remove the handle. Unscrew the tophandle bracket from the handle rod(h1). Unscrew the bottom handle brack-et from the door (h2)Unscrew the top handle bracket fromthe door (h3).11. Install the handle in the opposite side.Re-screw the handle bracket on thedoor (h4). Turn the handle bracket withthe handle and screw them to the door(h5) and the fitted handle bracket (h6).12. Re-insert the lower door on the lowerhinge pivot (b2).13. Insert the middle hinge (m2) into theleft drill of the lower door.14. Unscrew the upper hinge pivot (t1) andplace it on the opposite side.15. Fit the upper door on the upper doorpivot.16. Re-insert the upper door on the middlehinge pivot (m5) slightly tilting bothdoors.17. Re-screw the middle hinge (m2). Donot forget the plastic spacer (m1).Do a final check to make sure that:• All screws are tightened.• The magnetic seal adheres to the cabinet.• The door opens and closes correctly.If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to thecabinet. In that case, wait for the natural fitting of the gasket.In case you do not want to carry out the above mentioned operations, contact the near-est After Sales Service Force. The After Sales Service specialist will carry out the reversibil-ity of the doors at your cost.ENVIRONMENTAL CONCERNSThe symbol on the product or on its packaging indicates that this product may notbe treated as household waste. Instead it should be taken to the appropriate collectionpoint for the recycling of electrical and electronic equipment. By ensuring this product isdisposed of correctly, you will help prevent potential negative consequences for theenvironment and human health, which could otherwise be caused by inappropriatewaste handling of this product. For more detailed information about recycling of thisproduct, please contact your local council, your household waste disposal service or theshop where you purchased the product.h1 h2 h3h4 h5 h6t120 Environmental concerns