AEG 30006VE User Manual

Also see for COMPETENCE 30006VE: User manual Installation and operating instructions

Contents

AEG 30006VE User Manual Manual pdf 23 page image

Folding down the heating element1. Remove the shelf support rails.2. Hold the heating element with the twohands at the front3. Pull it forwards against the spring pres-sure and out along the support on bothsides.4. The heating element folds down.The oven ceiling is ready to clean.Installing the heating element1. Install the heating element in opposite se-quence.Install the heating element correctly on the two sides above the support on the inner wallof the oven.2. Insert shelf support rails.Removing the drawerThe drawer underneath the oven can be removed for easier cleaning.Removing the drawer1. Pull the drawer out as far as possible.2. Lift the drawer slightly, so that can be lif-ted upwards at an angle of the drawerguides.Inserting the drawer1. Set the drawer on the drawer's supportrails. Make sure that drawer's middleguide engages into the middle rail.2. Lower the drawer to the horizontal andpush it in.WARNING!When the oven is in use, heat can build up in the drawer. For this reason, do not keep flam-mable things in there such as e.g. cleaning materials, plastic bags, oven gloves, paper, clean-ing sprays, etc.Oven lampWARNING!There is a danger of electrical shock!Before you change the oven lamp:• Switch off the oven.• Remove the fuses in the fuse box or switch off the circuit breaker.12Oven - Care and Cleaning 23