AEG 37699MO-MN User Manual

Also see for 37699MO-MN: User manual

Contents

8 www.aeg.comMinute counter (from 0.01 to 0.59 =hh,mm)Press push button 1 and select cookingtime with push button 5 or 6. Thesymbol turns on. At the end of the settime the buzzer will go off and thesymbol turns off.Semi-automatic operation(with cooking time from 0.01 to 23.59= hh,mm)By pressing push button 2 and settingthe length of cooking time with pushbutton 5 or 6, the AUTO and symbols willlight up and stay on all the time. At theend of the set time the symbol willturn off, the AUTO symbol will flash andthe buzzer will go off.Semi-automatic operation(with end of cooking time from 0.01 to23.59 = hh,mm)By pressing push button 3 and settingthe end of cooking time with pushbutton 6, the AUTO and symbols will turnon and stay on all the time. At the endof the set time the symbol will turnoff, the AUTO symbol will flash and thebuzzer will go off.Automatic operation(with the start of cooking timedelayed)First programme cooking time (boththe AUTO and symbol will turn on)and then the end of cooking time (thesymbol will turn off) as describedpreviously. The symbol will turn onagain when baking in the oven starts. Atthe end of cooking time the symbolwill turn off, the AUTO symbol will flashand the buzzer will go off.Manual operationManual operation is only possible whenthe automatic programming has finishedor after having cancelled it by pressingpush button 4. The AUTO symboldisappears and the symbol turns on.BuzzerThe buzzer will go off at the end of aprogramme or at the end of the minutecounter function and lasts about 7minutes. The buzzer can be stoppedby pressing one of the function pushbuttons.Programme start and controlThe programme starts after setting. Theprogramme set can be controlled at anytime by pressing the corresponding pushbutton.Correcting/cancelling the programmesettingAn automatic function programmingerror will occur if the time shown on theclock is between the cooking start timeand cooking end time. This error will besignalled immediately by a buzzer andthe AUTO symbol will flash. A settingerror can be corrected by altering theduration or end of cooking time. Anyprogramme that has been set can becorrected at any time by pressing thecorresponding programming key andthen key 5 or 6. To cancel a programme,correct the time set bringing it to avalue of “0.00”. If functioning time iscancelled the end of functioning iscancelled too and vice versa. The oventurns off automatically and the AUTOsymbol flashes. Press key 4 to set theprogrammer on manual operation. Theright time cannot be corrected whenthe automatic operation programme isworking.