3. BEFORE FIRST USEWARNING!Refer to "Safety information"chapter.3.1 Initial Cleaning• Remove all accessories and removableshelf supports (if applicable).• Clean the appliance before first use.Refer to the chapter "Care andcleaning".3.2 Setting the timeYou must set the time before youoperate the oven.When you connect the appliance to theelectrical supply or after a power cut, theindicator for the Time of Day functionflashes.Press the + or - button to set the correcttime.After approximately five seconds, theflashing stops and the display shows thetime of day you set.To change the time, pressagain and again until the indica-tor for the Time of Day functionflashes. You must not set the Du-ration or End function atthe same time.To use the appliance, push the knob.The knob comes out.3.3 PreheatingPreheat the empty appliance to burn offthe remaining grease.1. Set the function and the maxi-mum temperature.2. Let the appliance operate for onehour.3. Set the function and the maxi-mum temperature.4. Let the appliance operate for ten mi-nutes.5. Set the function and the maxi-mum temperature.6. Let the appliance operate for ten mi-nutes.Accessories can become hotter thanusually. The appliance can emit an odourand smoke. This is normal. Make surethat the airflow is sufficient.4. HOB - DAILY USEWARNING!Refer to "Safety information"chapter.4.1 Heat settingKnob FunctionKeep Warm0 Off positionKnob Function1-9 Heat settings(1 - lowest heat setting, 9 -highest heat setting)1. Turn the knob to a necessary heatsetting.2. To stop the cooking, turn the knobto the 0 position.Use the residual heat to decreaseenergy consumption. Deactivatethe cooking zone approximatelyENGLISH 7