AEG 75552G Operating Instructions Manual

AEG 75552G Operating Instructions Manual Manual pdf 22 page image

22CommissioningWhen the hob has been fully installed it will be necessary to checkthe minimum flame setting. To do this, follow the procedure below.- Turn the gas tap to the MAX position and ignite.- Set the gas tap to the MIN flame position then turn the controlknob from MIN to MAX several times. If the flame is unstable oris extinguished follow the procedure below.Procedure:Re-ignite the burner and set to MIN.Remove the control knob.To adjust, use a thin bladedscrewdriver and turn theadjustment screw (see diagram)until the flame is steady and doesnot extinguish, when the knob isturned from MIN to MAX. Repeatthis procedure for all burners.Pressure TestingRemove left hand pan support and front left burner capand crown.Fit manometer tube over the injector.Turn on the burner gas supply and ignite another burner.The pressure reading should be nominally 20mbar andmust be between 17 mbar and 25 mbar.Turn off the burner supplies.))minimum adjustment screw

/ 24

Related manuals for AEG 75552G