AEG 79902 Operating Instructions Manual

AEG 79902 Operating Instructions Manual Manual pdf 35 page image

354. Touch the Decreasing Control to selectthe required type of gas.5. After selecting the type of gas, switch offthe hob touching the main ON/OFF Control.6 . Touch the main ON/OFF Controlagain to reactivate the hob.The appliance is automatically set to thenormal “User Mode”.7. Light all the burners and adjust their flameto minimum, in order to check the flamestability (visual check).8. At the same time, check the flame aspect(visual check).If both the flame stability and the flame aspectare satisfactory, the setting of the hob for thenew gas type is completed.If the flame stability is not satisfactory, carry outan additional adjustment as described in thefollowing paragraph.Minimum flame adjustmentIf the flame stability and the flame aspectare not satisfactory, proceed as follows:1. Carry out the steps described in theparagraph “Setting the hob for the new gastype” - points 1, 2 and 3.2. Light the burner to be adjusted followingthe instructions given in the paragraph“How to light a burner”.The burner is automatically set to theminimum flame level.3. If the flame minimum level is too low, theburner extinguishes. The hob automaticallycarries out a minimum level adjustment andthen relights the burner.