AEG 8490 D Operating And Installation Instructions

Contents

AEG 8490 D Operating And Installation Instructions Manual pdf 4 page image

4The control panelUsing the cooker hoodT1: Main switch on/off (Activating and deactivating the stand-by mode)T2: Sensor switch enable/disableT3: Lamps on/offD1: Filter saturation indicatorD2: Motor speed display 1-2-3-P (intensive)D1-D2: Minute count down display (delayed switch off)T4: Motor speedT5: Intensive speed on/offT6: Switch for delayed switch offSENSOR: Display for enabled sensor switchFunction at displayed ”SENSOR”l If the hand is moved over the sensor or the knob T4 is pressed, the lightis switched on and the motor starts to run on second speed.l Speed changes can be made with the knobs T4/T5l If the hand is again mowed over the sensor, the light and motor isswitched offl If, when stand-by mode is activated, the knob T5 is pressed, theintensive speed is started and the light is switched on.Function when ”SENSOR” is not displayedl By pressing the knob T4, the lamps are switched on and the motorstarts on second speedl Speed changes can be made with the knobs T4/T5Fig. 2