AEG 88101 KF-N Installation And Operating Instructions Manual

AEG 88101 KF-N Installation And Operating Instructions Manual Manual pdf 25 page image

53Installation InstructionsSafety instructionsThe laws, ordinances, directives and standards in force in the country ofuse are to be followed (safety regulations, proper recycling in accord-ance with the regulations, etc.)Installation may only be carried out by a qualified electrician.The minimum distances to other appliances and units are to be ob-served.Anti-shock protection must be provided by the installation, for exampledrawers may only be installed with a protective floor directly under-neath the appliance.The cut surfaces of the worktop are to be protected against moistureusing a suitable sealant.The sealant seals the appliance to the work top with no gap.When building in, protect the underside of the appliance from steamand moisture, e.g. from a dishwasher or oven.Avoid installing the appliance next to doors and under windows. Other-wise hot cookware may be knocked off the rings when doors and win-dows are opened.1 WARNING!Risk of injury from electrical current.• The electrical mains terminal is live.• Make electrical mains terminal free of voltage.• Observe connection schematic.• Observe electrical safety rules.• Ensure anti-shock protection through correct installation by a quali-fied electrician.• The appliance must be connected to the electrical supply by a quali-fied electrician.1 IMPORTANT!Risk of injury from electrical current.Loose and inappropriate plug and socket connections can make the ter-minal overheat.• Have the clamping joints correctly installed by a qualified electrician.• Use strain relief clamp on cable.• In the event of single-phase or two-phase connection, the appropri-ate mains cable of type H05BB-F Tmax 90° (or higher) must be used.