5.7 Heat-up indicatorWhen you activate an oven function, thebars in the display come on one byone. The bars show that the oventemperature increases or decreases.6. CLOCK FUNCTIONS6.1 Clock functions tableClock function ApplicationTIME OF DAY To show or change the time of day. You can change thetime of day only when the appliance is off.DURATION To set how long the appliance operates. Use only whenan oven function is set.END To set when the appliance deactivates. Use only whenan oven function is set.TIME DELAY To combine DURATION and END function.MINUTE MINDER Use to set a countdown time. This function has no ef-fect on the operation of the appliance. You can set theMINUTE MINDER at any time, also if the appliance isoff.00:00 COUNT UP TIMER If you do not set any other clock function the COUNTUP TIMER automatically monitor how long the appli-ance operates. It is on immediately when the ovenstarts to heat.The Count Up Timer cannot be used with the functions:DURATION, END, core temperature sensor.6.2 Setting and changing thetimeAfter the first connection to the mains,wait until the display shows and"12:00". "12" flashes.1. Press or to set the hours.2. Press to confirm and switch to setthe minutes.The display shows and the sethour. "00" flashes.3. Press or to set the currentminutes.4. Press to confirm or the set time ofday will be saved automatically after5 seconds.The display shows the new time.To change the time of day pressagain and again until the indicator for thetime of day flashes in the display.6.3 Setting the DURATION1. Set an oven function.2. Press again and again untilstarts to flash.3. Press or to set the minutes andthe hours for DURATION time.4. Press to confirm.When the time ends an acoustic signalsounds for 2 minutes. and timesetting flash in the display. The appliancedeactivates automatically.5. Press any button to stop the acousticsignal.www.aeg.com10