AEG BEB351010M User Manual

Also see for BEB351010M: User manual User manual User manual

Contents

• Before carrying out any maintenance, disconnect theappliance from the power supply.• WARNING: Ensure that the appliance is switched offbefore replacing the lamp to avoid the possibility ofelectric shock.• Do not use the appliance before installing it in thebuilt-in structure.• Do not use a steam cleaner to clean the appliance.• Do not use harsh abrasive cleaners or sharp metalscrapers to clean the glass door since they can scratchthe surface, which may result in shattering of the glass.• If the mains power supply cable is damaged, it mustbe replaced by the manufacturer, its AuthorisedService Centre or similarly qualified persons to avoidan electrical hazard.• To remove the shelf supports first pull the front of theshelf support and then the rear end away from theside walls. Install the shelf supports in the oppositesequence.2. SAFETY INSTRUCTIONS2.1 InstallationWARNING!Only a qualified person mustinstall this appliance.• Remove all the packaging.• Do not install or use a damagedappliance.• Follow the installation instructionssupplied with the appliance.• Always take care when moving theappliance as it is heavy. Always usesafety gloves and enclosed footwear.• Do not pull the appliance by thehandle.• Install the appliance in a safe andsuitable place that meets installationrequirements.• Keep the minimum distance fromother appliances and units.• Before mounting the appliance, checkif the oven door opens withoutrestraint.• The appliance is equipped with anelectric cooling system. It must beoperated with the electric powersupply.• The built-in unit must meet thestability requirements of DIN 68930.Cabinet minimumheight (Cabinet un-der the worktop mini-mum height)600 (600) mmCabinet width 550 mmCabinet depth 605 (580) mmHeight of the front ofthe appliance594 mmHeight of the back ofthe appliance576 mmWidth of the front ofthe appliance549 mmwww.aeg.com4