AEG BP3003021 User Manual

Also see for BP3003021: User manual User manual User manual User manual

AEG BP3003021 User Manual Manual pdf 23 page image

To change length of selected procedure ( P1 or P2 ), press to set , then press orto set length for the pyrolytic procedure.You can use the End function to delay start of the cleaning process.When the oven reaches pre-set temperature, the door locks. The symbol and the bars ofthe heat indicator come up, until the door unlocks again.During pyrolytic cleaning the lamp is off.Cleaning reminderTo remind you that the pyrolytic cleaning is necessary the cleaning reminder symbol flashesin the display PYR after every activating and deactivating the appliance for the next 10seconds.The cleaning reminder goes off the display:• after end of the pyrolytic cleaning function;• if you use or , when is flashing;Shelf railsYou can remove the shelf rails to clean the side walls.Removing the shelf rail1. Pull the front of the shelf rail away fromthe side wall.2. Pull the shelf rail from the back of the sidewall to remove it.To install the shelf rail follow the procedure inreverse.Valid with telescopic runners:The retaining pins on the telescopic shelf run-ners must point to the front!Oven lampWARNING!There is a risk of electrical shock.Oven lamp and the lamp glass cover can be hot.12Care and cleaning 23