Button Function Description, MINUS, PLUS To set a value for timeHeat-up / Residual heat indicatorIf you activate an oven function, the bars in the display come on one by one. The barsshow that the oven temperature increases or decrease.CLOCK FUNCTIONSSYMBOL FUNCTION DESCRIPTIONMINUTE MINDER Use to set a countdown time. This function has no effect onthe operation of the oven.TIME OF DAY To set, change or control the time of day. Refer to 'Setting thetime of day'.DURATION Use only when the oven function is set to set how long theoven operates.END Use only when the oven function is set to set when the ovenstops. You can use Duration and End at the same time (Timedelay), if the appliance is to be activate and deactivate auto-matically later.Press again and again to switch between the clock functions.To confirm settings of the clock functions use or wait 5 seconds for an automatic con-firmation.Setting the DURATION or END1. Press again and again until the display shows or .or flashes in the display.2. Press or to set minutes.3. Press to confirm.4. Press or to set the necessary hour.5. Press to confirm.A sound operates after the time ends for 2 minutes. or symbol and time settingflash in the display. The oven stops.6. Press any button or open the oven door to stop the sound.If you press button during setting hours for DURATION , the appliance goes to set-ting of the END function.Setting the MINUTE MINDERUse to set a countdown (maximum 23 h 59 min) This function has no effect on the opera-tion of the ovenClock functions 11