Symbol Name DescriptionTemperature You can change the temperature.Core temperature sensor The core temperature sensor is in thecore temperature sensor socket.Door lock The door lock function operates.Light You deactivated the light.Minute minder The minute minder function operates.4.3 Heat up indicatorIf you activate an oven function, the barscome on in the display. The barsshow that the temperature in theappliance increases or decreases.When the appliance is at the settemperature, the bars go off the display.5. BEFORE FIRST USEWARNING!Refer to Safety chapters.5.1 Initial CleaningRemove all accessories and removableshelf supports from the appliance.Refer to "Care andcleaning" chapter.Clean the appliance before first use.Put the accessories and the removableshelf supports back to their initialposition.5.2 Setting the timeAfter the first connection to the mains, allsymbols in the display are on for someseconds. For the subsequent fewseconds the display shows the softwareversion.After the software version goes off, thedisplay shows h and 12:00. "12" flashes.1. Touch or to set the hours.2. Touch or .3. Touch or to set the minutes.4. Touch or .The Temperature / Time display showsthe new time.5.3 Changing the timeYou can change the time of day onlywhen the appliance is off.Touch .flashes in the display.To set the new time of day, refer to"Setting the time".6. DAILY USEWARNING!Refer to Safety chapters.6.1 Operating the applianceTo operate the appliance you can use:• the manual mode• automatic programmeswww.aeg.com10