AEG BP730402K User Manual

Option Description1 1:00 h for alow degree ofdirt2 1:30 h for ausual degreeof dirt3 2:30 h for ahigh degreeof dirtYou can use the End function todelay the start of the cleaningprocedure.7. Touch to activate the Pyrolysisfunction.12.4 Cleaning reminderTo remind you that the pyrolytic cleaningis necessary, the cleaning remindersymbol flashes in the display aftereach deactivation of the appliance forthe next 10 seconds.The cleaning remindergoes out:• after the end of thepyrolytic cleaning.• when you deactivate it inthe basic settings. Referto "Using the settingsmenu".12.5 Removing and installingthe doorYou can remove the door and theinternal glass panels to clean it. Thenumber of glass panels is different fordifferent models.WARNING!Be careful when you removethe door from the appliance.The door is heavy.1. Open the door fully.2. Fully press the clamping levers (A) onthe two door hinges.AA3. Close the oven door to the firstopening position (approximately 70°angle).4. Hold the door with one hand on eachside and pull it away from theappliance at an upwards angle.5. Put the door with the outer sidedown on a soft cloth on a stablesurface. This is to prevent scratches.6. Hold the door trim (B) on the topedge of the door at the two sidesand push inwards to release the clipseal.12B7. Pull the door trim to the front toremove it.8. Hold the door glass panels on theirtop edge one by one and pull themup out of the guide.9. Clean the glass panel with water andsoap. Dry the glass panel carefully.When the cleaning is completed, installthe glass panels and the door. Do theabove steps in the opposite sequence.Install the smaller panel first, then thelarger.www.aeg.com36