AEG BP8715001 User Manual

Also see for BP8615001: User manual User manual

Contents

6.8 Energy savingThe appliance contains featureswhich help you save energyduring everyday cooking:• Residual heat:– When the heating function or pro-gramme operates, the heating ele-ments are deactivated 10 % earlier(the lamp and fan continue to oper-ate). For this feature to operate, thecooking time must be longer than30 minutes or you must use theclock functions ( Duration , EndTime ).– When the appliance is off, you canuse the heat to keep food warm.The display shows the remainingtemperature.• Cooking with the lamp off - Touchand hold for 3 seconds to deacti-vate the lamp during cooking.• Eco functions - refer to " HeatingFunctions ".7. CLOCK FUNCTIONS7.1 Clock functionsSymbol Function DescriptionMinute MinderTo set a countdown (max 2 h 30 min). This functionhas no effect on the operation of the appliance.You can also activate it when the appliance is off.Use to activate the function. Press or toset the minutes and OK to start.Duration To set how long the appliance has to be in opera-tion (max. 23 h 59 min).End Time To set the switch-off time for a heating function(max. 23 h 59 min).If you set the time for a clock function,the time starts to count down after 5 sec-onds.If you use the clock functions Du-ration and End Time ,the appliance deactivates theheating elements after 90 % ofthe set time. The appliance usesthe residual heat to continue thecooking procedure until the timeends (3 - 20 minutes).Setting the clock functions1. Set a heating function.2. Press again and again until thedisplay shows the necessary clockfunction and the related symbol.3. Press or to set the necessarytime. Press OK to confirm.When the time ends, an acoustic sig-nal sounds. The appliance deacti-vates. The display shows a message.4. Press a sensor field to stop the sig-nal.• With Duration and EndTime you must set theheating function and the tem-perature first. Then you can setthe clock function. The appli-ance deactivates automatically.• You can use Duration andEnd Time at the sametime if you want to automati-cally activate and deactivatethe appliance at a given timelater.• When you use the Core tem-perature sensor (if applicable),the Duration and EndTime functions do not op-erate.ENGLISH 13