• Deactivating the display - Ifnecessary, you can fully deacti-vate the appliance. Touchand at the same time untilthe display goes out. This stepalso activates the appliance.• Eco functions - refer to "Ovenfunctions".7. CLOCK FUNCTIONSSYMBOL FUNCTION DESCRIPTIONTIME OF DAY To examine the time of day. For changing thetime of day refer to 'Setting and changing thetime'.DURATION To set how long the appliance operates.END To set when the appliance deactivates. Youcan use the Duration and End functions at thesame time (Time delay), if the appliance is tobe activated and deactivated automaticallylater.SET+GO To start the appliance with the necessary set-tings with only one touch of the sensor field,any time later.7.1 Count Up TimerUse the Count Up Timer to monitor howlong the appliance operates. It is on im-mediately when the appliance starts toheat.Reset the Count Up Timer: touch .Touch until the display shows"00:00" and the Count Up Timer startsto count up again.You cannot use the Count UpTimer when Duration or End isset.7.2 Setting the DURATION1. Activate the appliance and set anoven function and temperature.2. Touch again and again until thedisplay shows . flashes in thedisplay.3. Use or to set the minutes forDURATION.4. Touch to confirm.5. Use or to set the hours forDURATION.If you touch or while youset the DURATION, the appli-ance switches to the setting ofthe END function.6. When the set time ends, an acousticsignal sounds for two minutes.and time setting flash in the dis-play. The appliance deactivates.Touch a sensor field or open theoven door to stop the acoustic sig-nal.7. Deactivate the appliance.7.3 Setting the END1. Activate the appliance and set anoven function and temperature.2. Touch again and again until thedisplay shows . flashes in thedisplay.3. Use or to set the END (firstyou set the minutes and then thehours) and or to confirm.4. When the set time ends, an acousticsignal sounds for two minutes.ENGLISH 13